Preparation of New Photosensitive ZrO2 Gel Films Using Hydroxyl-Substituted Aromatic Ketones as Chemical Modification Reagents and their Patterning

ZrO₂ gel films were prepared from zirconium tetra-n-butoxide chemically modified with one of hydroxyl-substituted aromatic ketones and 1′-hydroxy-2′-acetonaphthone, by the sol-gel method. The obtained gel film showed an absorption band, characteristic of the π-π* transition of chelate ring, at around 410 nm. The band was shifted to longer wavelength region than those for the gel films using β-diketones. The reason is thought that the hydroxyl-substituted aromatic ketone has π-electron system to form the condensed chelate ring. The absorption band associated with the chelate ring gradually decreased in intensity with UV-irradiation using a high pressure mercury lamp. This indicates that the chelate ring dissociates by the UV-irradiation and that the gel film exhibits photosensitivity. Utilizing the photosensitivity, fine patterns (about 1 μm) could be fabricated by UV-irradiation through a mask and leaching.     

He I (584 Å) photoelectron spectra and photoionization cross sections of atomic chlorine and bromine

Well-resolved He I photoelectron spectra of atomic chlorine and bromine have been obtained without serious background electrons, giving rise to relative photoelectron intensities associated with differential photoionization cross sections at an angle of 90° with respect to the incident 584 Å radiation.     

New approaches inμ + SR studies on critical phenomena in Ni

The critical phenomena in Ni are probed by pulsedSR method under longitudinal- and zero external magnetic fields. The sample magnetization around the critical temperature is confirmed simultaneously by bulk magnetization measurement in situ, disappearance of transverseSR signal and recovery of asymmetry under longitudinal field. At the same time, the ratio of the ⁺ hyperfine field to the bulk magnetization in the ferromagnetic phase below the critical temperature is determined from the observables obtained only in the present experiment. The zero- and low-field longitudinal relaxation rate of muon does not diverge in approaching toT _c in the paramagnetic region, but seems to reach a saturation value.This work is supported by the Grand-in-Aid of the Japanese Ministry of Education, Culture and Science.     

Studies on reactions of the N-phosphonium salts of pyridines. XIII. Direct polycondensation reaction of carbon dioxide or disulfide with diamines under mild conditions

Polyureas of high molecular weight were obtained by the direct polycondensation reaction of carbon dioxide with diamines at 40°C for several hours under a pressure of carbon dioxide (below 30 atm) by use of diphenyl phosphite in pyridine. Optimal temperature and pressure were 40°C and 20 atm of carbon dioxide. The polycondensation reaction was also affected by solvents and type and amounts of tertiary amines. Pyridine was most effective as tertiary amine and solvent as well. Of the phosphorous compounds used, triaryl phosphites and diphenyl phosphite were most effective, but trialkyl phosphites failed to give polymer. The reaction was assumed to proceed via a carbamyl N-phosphonium salt of pyridine formed by dephenoxylation of phosphites. Similarly, polythioureas were prepared by heating a mixture of carbon disulfide, diamines, and diphenyl phosphite in pyridine at 40°C for 6 hr under nitrogen.     

Donor–acceptor–acceptor-type near-infrared fluorophores that contain dithienophosphole oxide and boryl groups: effect of the boryl group on the nonradiative decay

The use of donor–π–acceptor (D–π–A) skeletons is an effective strategy for the design of fluorophores with red-shifted emission. In particular, the use of amino and boryl moieties as the electron-donating and -accepting groups, respectively, can produce dyes that exhibit high fluorescence and solvatochromism. Herein, we introduce a dithienophosphole P-oxide scaffold as an acceptor–spacer to produce a boryl- and amino-substituted donor–acceptor–acceptor (D–A–A) π-system. The thus obtained fluorophores exhibit emission in the near-infrared (NIR) region, while maintaining high fluorescence quantum yields even in polar solvents (e.g. λ_em = 704 nm and Φ_F = 0.69 in CH₃CN). A comparison of these compounds with their formyl- or cyano-substituted counterparts demonstrated the importance of the boryl group for generating intense emission. The differences among these electron-accepting substituents were examined in detail using theoretical calculations, which revealed the crucial role of the boryl group in lowering the nonradiative decay rate constant by decreasing the non-adiabatic coupling in the internal conversion process. The D–A–A framework was further fine-tuned to improve the photostability. One of these D–A–A dyes was successfully used in bioimaging to visualize the blood vessels of Japanese medaka larvae and mouse brain.

Combination of electron-accepting diarylboryl terminal groups and dithienophosphole oxide spacers with electron-donating triarylamine moieties produces donor–acceptor–acceptor type π-systems, which exhibit emissions in the near-infrared region.     

Synthesis of nitrogen-containing heterocycles. 8. Preparation and ring-opening of spiro[cycloalkane-[1′,2′,4′]triazolo[1′,5′-c]pyrimidine] derivatives

Diaminomethylene- and aminomethylthiomethylenehydrazones [2] of cyclic ketones 1–8 readily reacted with ethoxymethylenemalononitrile to give spiro[cycloalkane-1,2′-[1,2′,4′]triazolo[1,5′-c]pyrimidine-8′-carbonitrile] derivatives 12–19 through the electrocyclic reaction of the initially formed condensation products 26 in moderate to high yields. The spiro[cyclopentanetriazolopyrimidine] derivatives underwent ring-opening at the cycloalkane moiety upon heating in solution to give 2-alkyl-5-substituted-[1,2,4]triazolo[1,5-c]pyrimidine-8′-carbonitriles 20–23 . When an alkyl substituent was introduced into the cyclopentane ring, cleavage of the spiro compounds occurred preferentially at the cyclopentane moiety between the spiro carbon and the more branched one. In contrast, the cyclohexane ring, especially of spiro-5-amino-triazolopyrimidines 17 and 18 strongly resisted to ring-opening under similar conditions, but those of 5-methylthiotriazolopyrimidines 14 gave up to 17 percent of cleavage after prolonged heating in hot ethanol. 2-t-Butyl-5-methylthio-2,3-dihydro[1,2,4]triazolo[1,5-c]pyrimidine-8-carbonitrile 25 [R³ = C(CH₃)₃] was highly susceptible to the cleavage even at room temperature and produced the corresponding 2-unsubstituted triazolopyrimidine 24 with loss of the t-butyl group.     

A synthesis of lumazine derivatives

Treatment of 6-amino-1,3-dimethyl-5-nitrosouracil (Ia) with dimethyl acetylenedicarboxylate (DMAD) in dimethylformamide (DMF) afforded 6,7-bis(dimethoxycarbonyl)-1,3-dimethyllumazine (II). Similarly, the reaction of 6-amino-1,3-dimethyl-5-phenylazouracil with DMAD gave also II. Hydrolysis of II with hydrochloric acid gave 1,3-dimethyllumazine-6-carboxylic acid (III). III was chlorinated with thionyl chloride and then aminated with ethanolic ammonia to give rise to 6-carbamoyl-1,3-dimethyllumazine (V). V was alternatively synthesized by the treatment of Ia with propiolamide in DMF.     

Studies on reactions of the N-phosphonium salts of pyridines. XIV. Wholly aromatic polyamides by the direct polycondensation reaction by using phosphites in the presence of metal salts

Poly-p-benzamide of high molecular weight (η_inh = ～ in H₂SO₄) was obtained by the direct polycondensation reaction of p-aminobenzoic acid (p-ABA) by means of diphenyl and triaryl phosphites in N-methylpyrrolidone (NMP)-pyridine solution containing lithium and calcium chlorides. Molecular weight of polymer varied with the amount of these salts, showing maximum values at the concentration of about 4 wt-% of LiCl or about 8 wt-% of CaCl₂ in the reaction mixture. The reaction temperature at around 80°C gave a polymer of the highest viscosity. The polycondensation reaction was also affected by monomer concentration, solvents, and tertiary amines like pyridine. Similarly, aromatic polyamides with high molecular weight (η_inh values up to 1.34 in H₂SO₄) were prepared from isophthalic acid and aromatic diamines, whereas terephthalic acid gave only low-viscosity polymers.     

Magnetic microcapsules for targeted delivery of anticancer drugs

To achieve targeted distribution of anticancer drugs with sustained activity, ferromagnetic ethylcellulose microcapsules containing an anticancer drug, mitomycin C (FM-MMC-mc), were prepared by a method based on phase separation principles. Two prototypes of FM-MMC-mc were made: one with the drug as the core and zinc ferrite on its capsular surface (outer type); the other with both the drug and zinc ferrite as the core (inner type). Both preparations provided a sustained-release property and a sensitive response to conventional magnetic force, although certain differences in the release rate of drug, magnetic responsiveness, and particle size were found between the two dosage forms. Animal studies showed that the magnetic microcapsules could be magnetically controlled in the artery and urinary bladder. VX2 tumors in the rabbit hind limb and urinary bladder were successfully treated with magnetic control of FM-MMC-mc. Pharmacokinetic study revealed that the targeting of the microcapsules markedly enhanced the drug absorption into the surrounding tissues for a prolonged period of time. The results indicate the feasibility and effectiveness of the magnetic microcapsules as a targeted drug delivery system.     

Preparation of high surface area ZrO2 and ZrO2-Y2O3 from the alkoxide

In order to obtain a catalyst support with a high surface area, ZrO₂ and ZrO₂-Y₂O₃ were prepared by the hydrolytic decomposition of the corresponding isopropoxide dissolved in benzene. The hydrolysis was carried out at 80°C using an excess amount of distilled water in flowing dry nitrogen. The precipitates thus obtained were dried at 100°C followed by calcination at 500°C in air or nitrogen for 1 h. The specific surface areas for both of the ZrO₂ and ZrO₂-Y₂O₃ increased with increasing amount of water added for hydrolysis, and the surface areas for ZrO₂-Y₂O₃ increased with increasing yttrium content. A ZrO₂ having a surface area of 130 m²/g was produced, and a stabilized tetragonal ZrO₂ with 15 mol% Y³⁺ having a surface area of 200 m²/g was produced. Furthermore, despite the difference in the ZrO₂ and ZrO₂-Y₂O₃ crystal structures, the lattice-strain of ZrO₂ has been unequivocally related to the surface area.